Walbro has released an updated version of the 39/50 DC/SS pump many people know as the 450LPH pump with the option of being E85 compatible. In overall appearance the pump dimensions are the same, for this unit to be used in E85 all electrical connections must be sealed, there for this new unit will have a build in electrical harness with a female Packard connector.
•Outperforms all current market in-tank fuel pumps
•Designed for engines with more than 500HP
•Award-winning OE Technology
•High- Pressure,High-flow performance
•OEM technology designed and developed for E85. All pumping components have been validated to OEM Specifications for approved use in E85/Flex fuel applications.
The conservative horsepower rating of this pump is that this pump can support 800 HP on 12 volts and up to 950 HP on 13.5 volts!!!!!!!
F90000267 Relieve Valve opens at 90 PSI and is fully open at 105 PSI
Flow Rate (lph): 450
Flow Rate (gph): 119
Pressure (psi): 50
Pressure (kPa): 345
Max System Pressure (psi): 87
Max System Pressure (kPa): 600
Filter Group: B
Inlet Diameter: 14mm
Inlet Configuration: 0 degree outlet fitting to inlet orientation
Part Number(s): F90000267 & 400-0085
**NOTE: You will not to upgrade to at least a 30 amp Relay for this fuel pump as it draws more power than your average fuel pump. We recommend getting an aftermarket fuel pump rewire kit. Ideally you want a 10 Gauge Power Wire, 10 Gauge Ground Wire & 30 Amp Fuse & Relay.
**NOTE: This pump requires some modification to your Neon SRT-4's fuel sending unit to install properly. I recommend searching on the SRT Forums for a detailed write-up on the installation to familiarize yourself with what is required to complete the installation.
FREE SHIPPING VIA USPS 1-3 DAY PRIORITY MAIL TO ANYWHERE IN THE USA INCLUDING ALASKA, HAWAII & PUERTO RICO!!